Use the Conformity Knowledge Base AI to help improve your Cloud Posture

Unrestricted FTP Access

Trend Micro Cloud One™ – Conformity is a continuous assurance tool that provides peace of mind for your cloud infrastructure, delivering over 750 automated best practice checks.

Risk Level: Very High (act immediately)
Rule ID: EC2-042

Ensure that your Amazon EC2 security groups don't allow unrestricted inbound access (i.e. 0.0.0.0/0 or ::/0) on TCP ports 20 and 21 in order to protect against attackers that use brute force methods to gain access to the EC2 instances associated with your security groups. TCP ports 20 and 21 are used for data transfer and communication by the File Transfer Protocol (FTP) client-server applications.

This rule can help you with the following compliance standards:

  • PCI
  • APRA
  • MAS
  • NIST4

For further details on compliance standards supported by Conformity, see here.

This rule can help you work with the AWS Well-Architected Framework.

This rule resolution is part of the Conformity Security & Compliance tool for AWS.

Security

Allowing unrestricted FTP access to your Amazon EC2 instances via security groups can increase opportunities for malicious activities such as brute-force attacks, FTP bounce attacks, spoofing, and packet capture attacks.


Audit

To determine if your Amazon EC2 security groups allow unrestricted FTP access, perform the following operations:

Using AWS Console

01 Sign in to the AWS Management Console.

02 Navigate to Amazon EC2 console at https://console.aws.amazon.com/ec2/.

03 In the navigation panel, under Network & Security, choose Security Groups.

04 Click inside the Filter security groups box located under the console top menu and select the following options from the Properties dropdown menu:

  1. Choose Protocol and select TCP from the protocols list.
  2. Choose Port range, type 20-21 for the port range, and press Enter.

05 Select the security group that you want to examine and choose the Inbound rulestab from the console bottom panel to access the inbound rules created for the selected group.

06 Check the configuration value available in the Source column for any inbound/ingress rules with the Port range set to 20 and 21. If one or more rules have the Source value set to 0.0.0.0/0 or ::/0(i.e. Anywhere), the selected Amazon EC2 security group allows unrestricted traffic on TCP port 20 and 21, therefore the File Transfer Protocol (FTP) access to the associated EC2 instance(s) is not secured.

07 Repeat steps no. 5 and 6 for each EC2 security group returned as result at step no. 4.

08 Change the AWS cloud region from the navigation bar and repeat the audit process for other regions.

Using AWS CLI

01 Run describe-security-groups command (OSX/Linux/UNIX) with predefined and custom query filters to expose the ID of each Amazon EC2 security group that allows unrestricted inbound access on TCP port 20 and 21 (FTP):

aws ec2 describe-security-groups
  --region us-east-1
  --filters Name=ip-permission.from-port,Values=20,21 Name=ip-permission.to-port,Values=20,21 Name=ip-permission.cidr,Values='0.0.0.0/0'
  --output table
  --query 'SecurityGroups[*].GroupId'

02 The command output should return a table with the requested security group ID(s):

--------------------------
| DescribeSecurityGroups |
+------------------------+
|  sg-01234abcd1234abcd  |
|  sg-0abcd1234abcd1234  |
+------------------------+

If the describe-security-groups command does not produce an output, there are no security groups that allow unrestricted inbound access on TCP ports 20 and 21 in the selected AWS region. If the command output returns a table with one or more security group IDs, those Amazon EC2 security groups allow unrestricted traffic on TCP ports 20 and 21, therefore the File Transfer Protocol (FTP) access to the associated EC2 instance(s) is not secured.

03 Change the AWS cloud region by updating the --region command parameter value and repeat steps no. 1 and 2 to perform the audit process for other regions.

Remediation / Resolution

To update the inbound rule configuration for your Amazon EC2 security groups in order to restrict FTP access to trusted entities only (i.e. authorized IP addresses and IP ranges, or other security groups), perform the following operations:

Using AWS CloudFormation

01 CloudFormation template (JSON):

{
	"AWSTemplateFormatVersion": "2010-09-09",
	"Description": "Configure security group to restrict inbound FTP access to trusted entities only",
	"Resources": {
		"EC2SecurityGroup": {
			"Type": "AWS::EC2::SecurityGroup",
			"Properties": {
				"GroupName": "cc-instance-security-group",
				"GroupDescription": "Allow FTP access",
				"VpcId": "vpc-01234abcd1234abcd",
				"SecurityGroupIngress": [
					{
						"Description": "Allow inbound FTP traffic",
						"IpProtocol": "tcp",
						"FromPort": 20,
						"ToPort": 20,
						"CidrIp": "0.0.0.0/0"
						"CidrIp": "10.0.15.0/24"
					},
					{
						"Description": "Allow inbound FTP traffic",
						"IpProtocol": "tcp",
						"FromPort": 21,
						"ToPort": 21,
						"CidrIp": "0.0.0.0/0"
						"CidrIp": "10.0.15.0/24"
					}
				],
				"SecurityGroupEgress": [
					{
						"Description": "Allow all outbound traffic",
						"IpProtocol": "-1",
						"FromPort": 0,
						"ToPort": 65535,
						"CidrIp": "0.0.0.0/0"
					}
				]
			}
		}
	}
}

02 CloudFormation template (YAML):

AWSTemplateFormatVersion: '2010-09-09'
	Description: Configure security group to restrict inbound FTP access to trusted entities only
	Resources:
	EC2SecurityGroup:
		Type: AWS::EC2::SecurityGroup
		Properties:
		GroupName: cc-instance-security-group
		GroupDescription: Allow FTP access
		VpcId: vpc-01234abcd1234abcd
		SecurityGroupIngress:
			- Description: Allow inbound FTP traffic
			IpProtocol: tcp
			FromPort: 20
			ToPort: 20
			CidrIp: '0.0.0.0/0'
			CidrIp: '10.0.15.0/24'
			- Description: Allow inbound FTP traffic
			IpProtocol: tcp
			FromPort: 21
			ToPort: 21
			CidrIp: '0.0.0.0/0'
			CidrIp: '10.0.15.0/24'
		SecurityGroupEgress:
			- Description: Allow all outbound traffic
			IpProtocol: '-1'
			FromPort: 0
			ToPort: 65535
			CidrIp: '0.0.0.0/0'

Using Terraform (AWS Provider)

01 Terraform configuration file (.tf):

terraform {
	required_providers {
		aws = {
			source  = "hashicorp/aws"
			version = "~> 4.0"
		}
	}
	required_version = ">= 0.14.9"
}
provider "aws" {
	profile = "default"
	region  = "us-east-1"
}
resource "aws_security_group" "ec2-security-group" {
	name        = "cc-instance-security-group"
	description = "Allow FTP access"
	vpc_id      = "vpc-01234abcd1234abcd"
	ingress {
		description      = "Allow inbound FTP traffic"
		from_port        = 20
		to_port          = 20
		protocol         = "tcp"
		cidr_blocks      = ["0.0.0.0/0"]
		cidr_blocks      = ["10.0.15.0/24"]
	}
	ingress {
		description      = "Allow inbound FTP traffic"
		from_port        = 21
		to_port          = 21
		protocol         = "tcp"
		cidr_blocks      = ["0.0.0.0/0"]
		cidr_blocks      = ["10.0.15.0/24"]
	}
	egress {
		description      = "Allow all outbound traffic"
		from_port        = 0
		to_port          = 0
		protocol         = "-1"
		cidr_blocks      = ["0.0.0.0/0"]
	}
}

Using AWS Console

01 Sign in to the AWS Management Console.

02 Navigate to Amazon EC2 console at https://console.aws.amazon.com/ec2.

03 In the navigation panel, under Network & Security, choose Security Groups.

04 Select the Amazon EC2 security group that you want to reconfigure (see Audit section part I to identify the right resource).

05 Select the Inbound rules tab from the console bottom panel and choose Edit inbound rules.

06 On the Edit inbound rules configuration page, change the traffic source for the inbound rule that allows unrestricted access through TCP port 20, by performing one of the following actions:

  1. Select My IP from the Source dropdown list to allow inbound traffic only from your current IP address.
  2. Select Custom from the Source dropdown list and enter one of the following options based on your access requirements:
    • The static IP address of the permitted host in CIDR notation (e.g. 10.0.0.5/32).
    • The IP address range of the permitted network/subnetwork in CIDR notation, for example 10.0.5.0/24.
    • The name or ID of another security group available in the same AWS cloud region.
  3. Choose Save rules to apply the configuration changes.

07 Repeat steps no. 4 – 6 to reconfigure other EC2 security groups that allow unrestricted FTP access.

08 Change the AWS cloud region from the navigation bar and repeat the remediation process for other regions.

Using AWS CLI

01 Run revoke-security-group-ingress command (OSX/Linux/UNIX) using the ID of the Amazon EC2 security group that you want to reconfigure as the identifier parameter (see Audit section part II to identify the right resource), to remove the inbound rules that allow unrestricted access on TCP port 20 and 21 (FTP):

  1. For TCP port 20 run the following command:
    aws ec2 revoke-security-group-ingress
      --region us-east-1
      --group-id sg-01234abcd1234abcd
      --ip-permissions IpProtocol=tcp,FromPort=20,ToPort=20,IpRanges=[{CidrIp="0.0.0.0/0"}],Ipv6Ranges=[{CidrIpv6="::/0"}]
      --query 'Return'
    
  2. The command output should return true if the request succeeds. Otherwise, it should return an error:
    true
    
  3. For TCP port 21 execute the following command:
    aws ec2 revoke-security-group-ingress
      --region us-east-1
      --group-id sg-01234abcd1234abcd
      --ip-permissions IpProtocol=tcp,FromPort=21,ToPort=21,IpRanges=[{CidrIp="0.0.0.0/0"}],Ipv6Ranges=[{CidrIpv6="::/0"}]
      --query 'Return'
    
  4. If successful, the command output should return true, otherwise it should return an error:
    true7
    

02 Run authorize-security-group-ingress command (OSX/Linux/UNIX) to add the inbound rule removed at the previous step with a different set of parameters in order to restrict access on TCP ports 20 and 21 to trusted entities only (IP addresses, IP ranges, or security groups). To create and attach custom inbound/ingress rules to the selected Amazon EC2 security group based on your access requirements, use one of the following options (the command does not produce an output):

  1. Add an inbound rule that allows traffic from an authorized static IP address via TCP port 20, using CIDR notation (e.g. 10.0.0.5/32):
    aws ec2 authorize-security-group-ingress
      --region us-east-1
      --group-id sg-01234abcd1234abcd
      --protocol tcp
      --port 20
      --cidr 10.0.0.5/32
    
  2. Add an inbound/ingress rule that allows traffic from a trusted IP address range via TCP port 20, using CIDR notation (for example, 10.0.5.0/24):
    aws ec2 authorize-security-group-ingress
      --region us-east-1
      --group-id sg-01234abcd1234abcd
      --protocol tcp
      --port 20
      --cidr 10.0.5.0/24
    
  3. Add an inbound rule that allows traffic from another security group (e.g. sg-01234123412341234) available in the same AWS cloud region via TCP port 20:
    aws ec2 authorize-security-group-ingress
      --region us-east-1
      --group-id sg-01234abcd1234abcd
      --protocol tcp
      --port 20
      --source-group sg-01234123412341234
    
  4. Change the --port parameter value to 21, then repeat steps a – c to add the required inbound rule(s), removed at step no. 1, e.g.:
    aws ec2 authorize-security-group-ingress
      --region us-east-1
      --group-id sg-01234abcd1234abcd
      --protocol tcp
      --port 21
      --cidr 192.0.8.0/32
    

03 Repeat steps no. 1 and 2 to reconfigure other EC2 security groups that allow unrestricted FTP access.

04 Change the AWS cloud region by updating the --region command parameter value and repeat steps no. 1 – 3 to perform the remediation process for other regions.

References

Publication date Jun 19, 2016

Unlock the Remediation Steps


Free 30-day Trial

Automatically audit your configurations with Conformity
and gain access to our cloud security platform.

Confirmity Cloud Platform

No thanks, back to article

You are auditing:

Unrestricted FTP Access

Risk Level: Very High